OBD SIGNAL CONVERTER
INTRODUCTION
Many aftermarket car accessories such as Gear Shift Lights, Tachometers or Digital Gear Displays require connection to electrical signals which are often not available on modern cars. The OBD Signal Converter from CARTEK simply plugs into the OBD (On Board Diagnostic) socket found on most modern cars and provides four useful signals by extracting and converting engine data from the car’s OBD port.
OBD PROTOCOLS
SAE J1850-PWM
SAE J1939
ISO 9141
ISO 14230
ISO 15765-4
OUTPUT SIGNALS
- RPM (Blue wire)
This is a 12v square wave signal where the frequency increases with engine speed. The signal outputs 2 pulses per crankshaft revolution - SPEED (Green wire)
This is a 12v square wave signal where the frequency increases with road speed. The output frequency is approximately 2500 pulses per kilometer (1570 pulses per mile). - ENGINE RUNNING (Grey wire)
This signal remains high (+12v) when the engine is stationary and is driven low (0v) when engine speed exceeds 350RPM. - VEHICLE TRAVELING (Yellow wire)
This signal remains high (+12v) when the car is stationary and is driven low (0v) when road speed exceeds 9 Km/h (6mph).
CLICK HERE FOR INSTRUCTIONS
WHERE TO BUY
Products
Battery Isolators
FiA Rain Lights
Shift Lights
Power Distribution Modules
Power Distribution Panels
Wireless Control Systems
Digital Gear Indicators
Contact
CARTEK AUTOMOTIVE ELECTRONICS LTD
Unit 25, Mitchell Point
Ensign Way, Hamble
Southampton, SO31 4RF
United Kingdom
Tel: +44(0)2380 457747
Email: info@cartekmotorsport.com
Cartek Links
