FOLLOW US

NEWS

PRODUCTS

DEALERS

BUY NOW

CONTACT

DOWNLOADS

Home

FiA Rain Lights

Wireless Steering Wheel Controls

Coolant Level Sensors

Shift Lights

Digital Gear Indicators

Liteblox Batteries

Battery Isolators

Power Distribution Modules

Power Control Panels

PRODUCTS

 © 2017 Cartek Automotive Electronics Limited. All Rights Reserved.






CARTEK NEWSLETTER

Subscribe and get our latest news, product releases and latest guides.



CONTACT

CARTEK AUTOMOTIVE ELECTRONICS LTD


Unit 25, Mitchell Point

Ensign Way, Hamble

Southampton, SO31 4RF

United Kingdom


Tel: +44(0)2380 457747

Email: info@cartekmotorsport.com

CARTEK LINKS

Click here for KMH-MPH Converters, Fog Light Controls and much more for the JDM Imports market



Click here to go to the Cartek Online Shop


CARTEK POWER DISTRIBUTION MODULES

 Designed to replace the functions of fuses, circuit breakers and relays in one small, fully electronics unit.

INTRODUCTION

This Power Distribution Module is ideal for race cars and motorcycles which have minimal onboard electrical circuits but still require rugged and reliable protection and control.


Simple connections and no configuration procedures makes this system very easy use and quick to install.


The 4 x 10 amp outputs can be used to control power to various devices such as ECUs, instrumentation, lighting, starter solenoid, radiator fan, etc.


Channels will automatically shut down if a short circuit or over-current is detected - LED Status indication on the PDM and Cartek Switch Panels makes fault finding simple.


PDM SWITCH PANELS

Cartek also produce a number of switch panels to be used in conjunction with the Power Distribution Module. These switch panels are produced with a variety of switches that include LED’s. These LED’s will tell you if a channel is switched on/off or they will flash to indicate a problem in the circuit. The switch panels can also be produced to have your own graphics/labels at request.



CK-PS-04 PDM Switch Panel

4x Black latching switches with LED status indication.

Blank panel for over-writing.


CK-PS-05 PDM Switch Panel

3x Black latching switches with LED status indication

plus Green momentary switch.

Blank panel for over-writing.



CK-PS-13 PDM Switch Panel

3x Black latching switches with LED status indication

plus Green momentary switch.

Panel marked with IGN, FUEL, ACC, START.


CK-PS-06 PDM Switch Panel

4x Coloured latching switches with LED status indication.

Blank panel for over-writing.


CK-PS-07 PDM Switch Panel

3x Colour latching switches with LED status indication

plus Green momentary switch.

Blank panel for over-writing.


CK-PS-14 PDM Switch Panel

3x Coloured latching switches with LED status indication

plus Green momentary switch.

Panel marked with IGN, FUEL, ACC, START.


CK-PP-28 PDM Switch Panel

4x Black latching switches with LED status indication

plus Fire Extinguisher button

plus Battery Isolator GT ON/OFF button.

Blank panel for over-writing.



CK-PP-27 PDM Switch Panel

3x Black latching switches with LED status indication

plus Green momentary switch plus Fire Extinguisher button

plus Battery Isolator GT ON/OFF button.

Blank panel for over-writing.


CK-PP-06 PDM Switch Panel

3x Black latching switches with LED status indication

plus Green momentary switch plus Fire Extinguisher button

plus Battery Isolator GT ON/OFF button.

Panel marked with FUEL, DASH, START, RAIN.


DIRECT REPLACEMENT

4 RELAYS

4 SWITCHES

4 FUSES

The Cartek Power Distribution Module Kit is a direct replacement for 4 x 10amp Fuses, 4 Relays and 4 Switches. This unit therefore reduces all the wiring in between the Fuses, Relays and Switches as well as simplifying the installation.


HOW IT WORKS

When mounting the PDM, electrical contact must be made between the vehicle's chassis/earth and the metal case of the PDM at its mounting points. 12v Power Input is supplied to the PDM via the M6 electrical stud. Power Output connections are made using 6.3mm spade terminals.


Each channel is turned ON by connecting the corresponding channel signal wire to chassis/earth. Connection can be made using dashboard switches, oil pressure switches, thermo-switches, etc. When a Cartek Switch Panel (pushbutton switches with integrated LED) is used then the LED will display the channel status:

   No LED   = Channel OFF

   LED on    = Channel ON

   Flashing  = ERROR


When short-circuit or over current is detected, the PDM will shut down that channel and the corresponding LED will begin to flash. To reset the error, switch the channel OFF then ON again.

DEDICATED LIGHTS MODULE

Cartek have now produced a dedicated Lights Module for kit cars and Rally Cars that use additional spot lights. The switch panel enables Low beam, High beam, and an extra switch to flash the lights. The Low and High beam channels both go up to a current rating of 20 Amps each.


CK-PK-L5 Aux Lamp Controller Kit


TECHNICAL DATA

SIZE: L = 90mm W=42mm

WEIGHT: 80g

POSITIVE POWER TERMINAL: M6 BRASS STUD

CHANNEL OUTPUT CONNECTIONS: 6.3mm MALE SPADE TERMINALS

OPERATIONAL VOLTAGE: 7V-18V

POWER SWITCHING CURRENT: 10A MAX EACH CHANNEL

CURRENT CONSUMPTION: 0.02A (NO LOAD)

OPERATING TEMPERATURE: -10°C - +85°C


WHERE TO BUY

FIND A DEALER

BUY ONLINE

HOW IT WORKS

SWITCH PANELS

DEDICATED MODULES

TECHNICAL DATA

WHERE TO BUY

POWER DISTRIBUTION MODULES

CLICK HERE FOR INSTRUCTIONS

CLICK HERE FOR DATASHEETS